Acer laptop wont turn on but the power light

Jan 4th, 2024
Abhishek Chauhan
Laptop
- Share :

Experiencing a situation where your laptop won't turn on, or your Acer Laptop is Not Turning On. The Power Light is Blinking, but the power light is on, which can be perplexing. Various factors, including hardware or software problems, could cause this issue. This detailed article will guide you through troubleshooting steps to fix a laptop that won't turn on despite the power light being on.

Step 1: Disconnect External Devices And Power Supply

Start by disconnecting any external devices connected to your laptop, including USB drives, printers, and docking stations. Remove all unnecessary peripherals and accessories. Next, disconnect the power supply by unplugging the power adapter from the laptop and removing the battery (if it is removable).

Step 2: Perform A Hard Reset

Performing a hard reset can help resolve power-related issues. Here's how to do it:

Ensure your laptop is entirely powered off.
Disconnect the power adapter and remove the battery (if applicable).
Press and hold the power button for about 15-20 seconds.
Release the power button.
Reconnect the power adapter (without the battery) and attempt to power your laptop.

Read More:- How To Reset Acer Laptop

Step 3: Check The Power Adapter And Charging

Ensure the power adapter is functioning correctly and providing power to your laptop. Here's what to do:

Inspect the power adapter for any physical damage or frayed cables in case of Acer Laptop Not Turning On and the Power Light Blinking. If any issues are found, consider replacing the power adapter.
Connect the power adapter to a working power outlet.
Ensure that the power adapter connector is securely plugged into the laptop.
Look for charging indicators on your laptop, such as LED lights or battery icons.
Leave your laptop connected to the power adapter for at least 15-30 minutes to ensure sufficient charge.

Step 4: Reset BIOS Settings

Resetting the BIOS settings can help resolve boot-up issues caused by incorrect configurations. Here's how to do it:

Turn off your laptop completely.
Locate the BIOS reset jumper on your laptop's motherboard or refer to your laptop's manual for its location.
Follow the instructions provided in the manual to reset the BIOS settings. This typically involves moving the jumper to the reset position for a few seconds and returning it to its original work.
Alternatively, you can remove and reinsert the CMOS battery for a few minutes. This will reset the BIOS settings to their default configuration.
Reconnect the power supply and attempt to power your laptop.

Read More:- How To Enter Bios In Acer Laptop

Step 5: Check The Display Output

Sometimes, a laptop may appear off when the display output is malfunctioning. Here's what you can do:

Connect your laptop to an external monitor or TV using the appropriate cable (VGA, HDMI, DisplayPort, etc.).
Power on your laptop and the external display.
Use the appropriate display input selection on the external monitor.
If you see the display on the external monitor, it indicates that the issue may be with your laptop's internal display. In this case, seek professional assistance for further diagnosis and repair.

Step 6: Look For A Professional

If nothing works for the issue of Acer Laptop Not Turning On, Power Light Blinking, and your laptop still won't turn on, it may be time to seek professional help. Contact your laptop manufacturer's customer support or take your computer to an authorized service center. They have the expertise to diagnose and repair complex hardware or internal component issues.

Also Read:- Top 5 Acer Laptop Problems and Solutions

Conclusion:

Following the troubleshooting steps outlined above, you can attempt to fix a laptop that won't turn on despite the power light being on. However, if the issue persists, it is recommended to seek professional assistance to ensure a proper diagnosis and resolution of the problem.