How To Fixing A HP Laptop Plugged In Not Charging Issue

Is your laptop plugged- into the charger but not charging? If yes, and you want to fix this issue, read this article to learn how to improve this Problem and charge your HP laptop without any problem.

What is the reason for the laptop not charging?

There may be various reasons your laptop suffers and can't charge itself. Some of the main reasons for setting issues are listed below -:

· Problem with the charger

· Troubleshooting problems on the laptop

· Battery damage

· Lifeless Battery

· If the AC (alternative current ) adapter is not working properly

· If the processor isn't working properly

· System failure, etc.

5 Ways to fix the charging issue?

If your HP laptop shows the message "plugged in not charging" over the battery icon, then you can directly use these simple manual methods to resolve this issue -

1. Change the power adapter of the laptop

If the AC or power adapter of the laptop isn't working correctly, it is also a reason for the battery being lacking your laptop's battery. A faulty Adapter leads to a "plugged in, not charging" issue. In this case, you have to prefer to change your AC Adapter. Buy an adapter of acceptable quality. One common indication of a wrong power adapter is the whizzing noise when you plug it into the switch point.

- if the AC adapter is silent, it doesn't mean it is not faulty.

- A silent AC adapter also has a fault incompatible with your laptop charging.

To confirm these problems with the AC adapter, try using a different fine-quality AC adapter to charge the HP laptop's battery.

If the new adapter charges your laptop's battery, the issue is not from your computer but the AC adapter that does not trust the laptop properly.

2. Restart or Reboot your laptop

Your laptop may have some troubleshooting or system-related problems. In this case, Restart or Reboot your computer to overcome this issue.

· Turn off your laptop correctly.

·        Flip your laptop to the backside and remove the battery.

·        Unplug and disconnect the AC adapter from the power and the laptop.

·        Press and hold the laptop's Power button for up to 10 seconds.

·        Put your battery back into the laptop after some time.

·        Plugged in and connected the AC adapter to the laptop and wall socket for power.

·        Restart the laptop or reboot it.

·        Now check the laptop to see if it is working or not.

Also Read: HP Laptop Touchpad Not Working on Windows 10

Also Read: 1 HP Is Equal To How Many Watts

3. Update the Battery drivers of the laptop

If the battery drivers are outdated, then charging issues also arise. To update battery drivers, follow these simple steps -:

Step 1-Turn on your laptop and Press Windows Key + R to open and Run the dialog box.

Step 2- Open the Command prompt page.

Step 3-Type this command devmgmt. MSC and press the ENTER button.

Step 4 - Check the Batteries section list on the page.

Step 5 - Then Right-click on the Microsoft ACPI-Compliant Control Method Battery option.

Step 6 - Select the Uninstall device option from the context menu.

Step 7- select Scan for hardware changes.

Step 8 -Right-click on the  Microsoft ACPI-Compliant Control Method Battery again.

Step 9 - Click on the Update Driver Software option this time.

Note -: You can also install and use software like DriverFix to update your drivers regularly so you won't experience charging issues in the future.

4. Clean the charging port

You can also clean the charging port; sometimes, dust settles down inside ports and causes charging issues.

5. Plugged in with the correct socket

Check the charger once to see whether it is connected to the socket correctly or not. Also, check whether there is any breakage into power chords or not. If there is any damage, then fix it at the service center.

Also Read: HP Service Center in Thane West & East Maharashtra

Also Read: HP Service Center in Pune

Conclusion:

This blog concludes with the methods to fix HP laptops' plugged-in, not-charging issues.